Access Controller
·
·
·
·
User Manual
42
7.4.6
Wiegand Settings
Purpose:
You can set the Wiegand channel and the communication mode.
Select the device in the device list, and click
Modify
to pop up the modifying device information
window.
It is recommended to leave these settings as default unless instructed to change by Ness
Technical staff.
Click
Wiegand-485 Settings
tab to enter the Wiegand settings interface.
Note:
The Wiegand Settings should be supported by the device.
Steps:
1.
Click the
Wiegand Settings
tab to enter the Wiegand Settings interface.
2.
Select the Wiegand channel No. and the communication mode in the dropdown list.
If you set the
Communication Direction
as
Send
, you are required to set the Wiegand Mode as
Wiegand 26 or Wiegand 34.
3.
Click
Save
to save the settings and the configured parameters will be applied to the device
automatically.
Note:
After changing the communication direction, the device will be rebooted. A prompt will be
popped up after changing the communication direction.
7.4.7
M1 Card Encryption
It is recommended to leave these settings as default unless instructed to change by Ness
Technical staff.
The M1 Card Encryption function increases the authentication security level, which should be
applied together with the card enrollment station of our company via the client software or the
web client. After issuing the card, you can set the M1 card encryption function on the controller.
Notes:
•
The function should be supported by the device.
•
For details about issuing card, refer to
Adding Person (Card)
in
4 In the
organization list on the
left, you should add a top organization as the parent organization of all organizations.
Click
Add
button to pop up the adding organization interface.
