Access Controller
·
·
·
·
User Manual
107
Card Linkage
Steps:
1.
Click to select the linkage type as
Card Linkage
.
2.
Select the card from the dropdown list and select the access control device as event source.
3.
Select the card reader from the table for triggering.
4.
Set the linkage target, select the access control device from the dropdown list as the linkage
target, and switch the property from
to
to enable this function.
Alarm Output
: The alarm output will be triggered for notification.
5.
Click
Save
button to save parameters.
7.10
Door Status Management
Note:
•
Before use, see section 7.11.1 Access Control Group Management below.
Purpose:
The door status of the added access control device will be displayed in real time. You can check the
door status and the linked event(s) of the selected door. You can control the status of the door and
set the status duration of the doors as well.
From the ‘Control Panel’ select
to open ‘Status Monitoring’
Select the ‘Door Status’ tab to open the ‘Door Status Management’ feature.
From the left hand window select the controller / Door Group you wish to monitor.
