Access Controller
·
·
·
·
User Manual
79
system showing the description of the reader.
Buzzer Time
: sets how long the reader buzzer will pulse for if programmed to pulse.
3.
Click the
Save
button to save parameters.
7.7.2
Card Reader Authentication
Purpose:
You can set what credential is required and during what time for access to be granted.
E.g. Card only during office hours and Card AND Code after hours. This is set for each controller
entry point.
Steps:
1.
Click
Card Reader Authentication
tab and select a reader on the left.
2.
Select a card reader authentication mode. The available authentication modes depend on the
card reader type:
To see what available options you have for the selected Controller and Reader, click on
‘Configure’ on the top right of the screen.
