Access Controller
·
·
·
·
User Manual
54
4.
Input the password (PIN No) of the card itself in the Card Password field. The card password
should contain 4 to 8 digits.
Note:
The password will be required when the card holder swiping the card to get enter to or
exit from
the door if you enable the card reader authentication mode as
Card and Password
,
Password and Fingerprint
, and
Card, Password, and Fingerprint
. For details,
Chapter 7.7.2
Card Reader Authentication.
5.
Click
to set the effective time and expiry time of the card.
6.
Select the
Card Reader Mode
for reading the card No.
A card can be entered into the system in 3 different ways.
1. Via the Controllers card reader (any reader on the system)
2. Via an Enrollement reader connected via a USB port to the clients PC running iVMS4200
software. (e.g. DS-K1F180-D8E)
3. Manually entering the full card Number (e.g. 8 digits – 3 Digit Site code followed by 5 digit
card No.)
Access Controller Reader:
Select “Read” and then place the card on the reader of the
Access Controller to get the card No.
Card Enrollment Station:
Select “Read” and then place the card on the Card Enrollment
Station to get the card No.
Note:
The Card Enrollment Station should connect with the PC running the client. You first
need to click
Set
Card Enrollment Station
to enter the following dialog to set it up before
reading a card.
