Ness 114-100 User Manual Download Page 124

Page: 124 / 130

Access Controller

User Manual

115

7.10.3

Real-time Card Swiping Record

Click

Card Swiping Record

tab to enter the following interface.

The logs of card swiping records of all access control devices will display in real time. You can view

the details of the card swiping event, including card No., person name, organization, event time,

etc.

You can also click the event to view the card holder details, including person No., person name,

organization, phone, contact address, etc.

7.10.4

Real-time Access Control Alarm

Purpose:

The logs of access control events will be displayed in real time, including device exception, door

event, card reader event, and alarm input.
Click

Access Control Alarm

tab to enter the following interface.

Summary of Contents for 114-100



































































































































Search results

Summary of Contents for 114-100

Reviews:

Related manuals for 114-100

Brands by name

Popular brands

Ness 114-100, User Manual

Search results

Summary of Contents for 114-100

Reviews:

Related manuals for 114-100

Brands by name

Popular brands