Ness 114-100 User Manual Download Page 72

Page: 72 / 130

Access Controller

User Manual

Select the Card Enrollment Station type.

Currently, the supported card reader types include DS-K1F100-D8E and

DS-K1F180-D8E

Set the parameters about the connected card enrollment station.

If the card is M1 card, and if you need to enable the M1 Card Encryption function, you

should check

Enable

checkbox of M1 Card Encryption and click

Modify

to select the

sector.

Click

Save

button to save the settings.

You can click

Restore

Default Value

button to restore the defaults.

Manually Input:

Input the card No. and click

Enter

to input the card No.

After issuing the card to the person, the person and card information will display in the

Person(s) with Card Issued list.

Click

to save the settings.

Summary of Contents for 114-100



































































































































Search results

Summary of Contents for 114-100

Reviews:

Related manuals for 114-100

Brands by name

Popular brands

Ness 114-100, User Manual

Search results

Summary of Contents for 114-100

Reviews:

Related manuals for 114-100

Brands by name

Popular brands