Ness 114-100 User Manual Download Page 110

Page: 110 / 130

Access Controller

User Manual

101

Click

Save

to save the settings.

You can click Copy to button to copy the access control event to other access control device,

alarm input, access control point, or card reader.
Select the parameters for copy, select the target to copy to, and click

to confirm.

Table 1. 1

Linkage Actions for Access Control Event

Linkage Actions

Descriptions

Audible Warning

The client software gives an audible warning when alarm is
triggered. You can select the alarm sound for audible warning.

Email Linkage

Send an email notification of the alarm information to one or
more email recipients.

Alarm on E-map

Display the alarm information on the E-map.

Note:

This linkage is only available to access control point and

alarm input. (i.e. Events)

Alarm Triggered

Pop-up Image

The image with alarm information pops up when alarm is
triggered.

7.9.2

Access Control Alarm Input Linkage

Purpose:

The access control alarm inputs can be linked to some actions (e.g., alarm output, host (controllers)
buzzer etc) when it is triggered.

Note:

The linkage here refers to the linkage of the client software’s (iVMS4200) own actions.

Summary of Contents for 114-100



































































































































Search results

Summary of Contents for 114-100

Reviews:

Related manuals for 114-100

Brands by name

Popular brands

Ness 114-100, User Manual

Search results

Summary of Contents for 114-100

Reviews:

Related manuals for 114-100

Brands by name

Popular brands