Neousys Technology Nuvo-8108GC Series User Manual Download

Page: 98 / 142

Nuvo-8108GC

4.1.6

TPM Availability

Trusted Platform Module (TPM) is a hardware-based cryptoprocessor to secure hardware by

integrating cryptographic keys into devices. The system is designed with on-board TPM 2.0

module. As TPM 2.0 requires 64-bit Windows 7/8/10 with UEFI boot mode, it is disable in

BIOS by default. For customers who want to utilize TPM feature, you will need to enable TPM

in BIOS as well as install Windows with UEFI mode.

To enable TMP availability:

When system boots up, press F2 to enter BIOS setup utility.

Go to

[Security] > [TPM Availability]

, press ENTER to bring up Options, Available/

Hidden.

Highlight your selection, press ENTER and press F10 to “Exit Saving Changes”.

Summary of Contents for Nuvo-8108GC Series















































































































































Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-8108GC Series, User Manual

Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands