Neousys Technology Nuvo-8108GC Series User Manual Download Page 64

Page: 64 / 142

Nuvo-8108GC

3.2.6

HDD/ SSD Installation

NOTE

Supports up to 15mm thickness HDD/ SSD.

The system has two SATA ports (indicated in

blue)

and two four pin power connectors

(indicated in

red

). One set of the SATA/ power cables is connected to the front hot-swappable

slot while the other can be connected to the tray in the enclosure. Please refer to the following

instructions on how to install 2.5” SATA HDD/SSD onto the enclosure tray.

Locate the hard drive tray on the enclosure. It is located next to the motherboard

heatsink. Remove the screws indicated and retrieve the tray out of the enclosure.

Summary of Contents for Nuvo-8108GC Series















































































































































Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-8108GC Series, User Manual

Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands