Neousys Technology Nuvo-8108GC Series User Manual Download

Page: 18 / 142

Nuvo-8108GC

2.2

External I/O Panel

The Nuvo-8108GC I/O panel features Gen2/ Gen1 USB3.0, DisplayPort, DVI, VGA, dual

Ethernet and COM ports.

No.

Item

Description

Power button

Use this button to turn on or shutdown the system.

3.5mm jack for speaker-output and microphone-input.

DisplayPort

Support display resolutions up to 4096 x 2304. Compatible with HDMI/

DVI via respective adapter/ cable (resolution may vary).

Reset button

Use this button to manual reset the system.

LED indicator

From top to bottom, the four system LEDs are PWR (system power),

HDD (hard disk drive), WDT (watchdog timer) and IGN (ignition

Summary of Contents for Nuvo-8108GC Series















































































































































Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-8108GC Series, User Manual

Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands