Neousys Technology Nuvo-8108GC Series User Manual Download Page 100

Page: 100 / 142

Nuvo-8108GC

100

4.1.8

Power & Performance (CPU SKU Power Configuration)

The system supports various 8

-Gen Coffee Lake LGA1151 CPUs. A unique feature, “

SKU

Power Config

” is implemented in BIOS to allow users to specify user-defined SKU power limit.

Although the system is designed to have best thermal performance with CPUs of 35W TDP,

you can install a 65W CPU and limit its SKU power (to 35W) to obtain more computing power.

This feature gives you the flexibility of CPU selection and great balance between computing

power and operating temperature range.

To configure the CPU SKU power limit:

1. When the system boots up, press F2 to enter BIOS setup utility.

2. Go to

[Power]

→

[Power & Performance]

3. Select a proper value of SKU power limit for

[SKU Power Config]

option.

4. Press F10 to "Exit Saving Changes".

Summary of Contents for Nuvo-8108GC Series















































































































































Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-8108GC Series, User Manual

Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands