Neousys Technology Nuvo-8108GC Series User Manual Download Page 37

Page: 37 / 142

Nuvo-8108GC

2.5.3

M.2 2242 (B Key), Mini-SIM Card Slot & Pin Definition

NOTE

The dual SIM card functionality is only available when Sierra Wireless EM7455/ 7430 solution is

installed. For other 4G add-on solutions, SIM card slot 1 is the default functioning slot.

The system has an M.2 2242 slot (indicated in

blue

) that works with dual SIM slots (4G + 3G),

one directly underneath and next to the slot (indicated in

red

). By installing a 3G or 4G M.2

module and SIM card, you can access the internet via the provider’s network.

For wireless 3G/ 4G, SMA antenna apertures are located on front/ rear panels.

Summary of Contents for Nuvo-8108GC Series















































































































































Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-8108GC Series, User Manual

Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands