Nuvo-8108GC
89
4.1.2
COM Port High Speed Mode
The high speed mode of each COM port effectively allows for the port's baud rate generator to
operate at 8x the speed with an effective baud rate of 921,600 bps (115,200 x 8). Please refer
to the following instructions on how to enable the high speed mode for your COM port (COM1
used as an example).
To set COM port high speed mode:
1.
Press
F2
when the system boots up to enter the BIOS setup utility.
2.
Go to
[Advanced] > [Peripheral Configuration]
.
3.
Enable or set the
[Set COM1 Mode as]
option to the desired mode.
4.
Highlight
[HS Mode]
and press ENTER to bring up options, highlight
[Enable]
and press
ENTER.
5.
Once set, press
F10
to save setting and exit.
Summary of Contents for Nuvo-8108GC Series
