Neousys Technology Nuvo-8108GC Series User Manual Download

Page: 61 / 142

Nuvo-8108GC

Gently press down and secure the module with an M2.5 P-head screw.

Clip on the IPEZ-to-SMA cable to the module and secure the antenna to the front or rear

panel. Please refer to the module’s manual for clip-on connection. If you need to install

other components, please refer to respective sections.

Clip on IPEZ-to-SMA cable

Secure antenna to rear panel

With the motherboard exposed, the SIM card is inserted with the gold fingers facing

downward. If you are inserting the SIM card with the system upright (heatsink fins

upwards), the gold fingers should be facing upward. The SIM socket is a push-push type.

The push-push mechanism means the SIM card is push-to-install and push-to-retrieve

Reinstall the system enclosure

and panel when done.

If you need to install other components, please refer to respective sections.

Summary of Contents for Nuvo-8108GC Series















































































































































Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-8108GC Series, User Manual

Search results

Summary of Contents for Nuvo-8108GC Series

Reviews:

Related manuals for Nuvo-8108GC Series

Brands by name

Popular brands