5
FEEDER STAND ASSEMBLY AND STAND HEIGHT ADJUSTMENT
Your new envelope feeder is packaged with the adjustable height floor stand removed and partially disassembled.
With a single 1/8” allen wrench, (included with the feeder) the stand can be re-assembled and the feeder can be
attached to the stand.
Feeder Stand Assembly
When assembled; the stand should look like this:
Step 1.
Carefully remove the feeder and the stand components from the box and set them on the floor or a large table.
Step 2.
Remove the locking levers and flat washers from the two leg assemblies
Upper stand assembly
2 Leg assemblies (with casters)
Top Plate (note orientation)
Locking casters
Top Plate (note orientation)
