29
3. Carefully lift the delivery table up high enough to clear the lower edge of the manual tray opening and move
the feeder in toward the printer. Ensure that the delivery table enters the manual feed tray opening without
resistance.
4. As you carefully push the feeder in towards the printer, guide the end of the delivery table in between the
manual feed tray paper guides. (manual tray guides MUST be positioned all the way out)
5. As the end of the delivery table approaches the overhanging tabs on the manual feed tray paper
guides, allow the table to drop down onto the manual tray.
6. Slowly push the feeder in towards the printer. If the side plates of the feeder do not enter the manual feed
tray opening, you may need to adjust the stand height. (Refer to the beginning of the manual for this procedure)
7. Continue to push the feeder in towards the printer until the lower portion of the side plates contact the printer
body as shown here:
Allow table to drop below
the overhanging tabs here
before pushing feeder in
further
Feeder side plate must fit
in opening just below the
gray metal plate on the
printer.
