30
The HD-CXENVL-FDR is equipped with a latching mechanism underneath the delivery table that secures
the feeder to the printer for consistent envelope registration. These spring-loaded latches connect to
the lower lip on the opening of the manual feed tray as you push the feeder in. You will hear a snapping
sound as the latches engage the printer.
8. After the feeder has been pushed all the way in and the latches have secured the feeder in place, set the speed
control of the feeder on at least 70% of maximum speed.
9. Turn the power switch ON to start the feeder. The first envelope in the delivery table should now advance to
the stop sensor at the end of the delivery table and the motor will stop.
Feeder should touch the
printer here.
Delivery table lifted to
show latching mechanism
Spring-loaded latches attach to lower “lip” on
printer when feeder is pushed in
Lip
Envelopes will advance
into the printer. The gap
between envelopes will
likely close at this point.
This is normal when
starting.
