4
5. Open the right side cover on the printer by pulling on the latch shown here:
6. With the right side door fully open, lift the feed roller assembly to gain access to the feed roller and sheet
separator area.
7. Pinch the two upper corners of the sheet separator assembly (rubber pad) and remove the assembly from the
printer
NOTE: The envelope feeder is equipped with a paper sensor that will be positioned just to the left of the printer’s
manual feed tray feed roller. It is possible for the sensor to detect the white plastic housing just to the left of the
feed roller, which can cause erratic feeding.
It is very important to place a piece of black tape or Velcro
(included with feeder) on this ledge so the sensor does not detect it.
Note: This tape will not affect the printer and can be left in place, even when not using envelope feeder!
THE HD-CXENVL-FDR INCLUDES AN ADJUSTABLE HEIGHT STAND. IT IS VERY IMPORTANT TO SET THE
STAND HEIGHT PROPERLY. REFER TO THE SECTION TITLED “FEEDER STAND ASSEMBLY AND STAND
HEIGHT ADJUSTMENT” FOR MORE INFORMATION.
Remove the separator assembly
Place black tape on this
area. (black Velcro
included with feeder
accessories)
