8
Attaching the feeder to the stand
Step 1.
Now you will attach the feeder to the stand using four button head screws and the included 1/8” allen wrench.
The bolts have been attached to the uprights of the stand for shipping. Remove these bolts from the stand.
Step 2
. (It is helpful to have an assistant hold the stand steady while attaching the feeder)
Carefully lift the feeder up by grasping the bridge as shown below and place the feeder over the top of the stand
with the stand legs near the middle of the feeder side plates
The stand should be oriented so the back plate of the feeder is on the same side as the back plate of the stand!
The feeder will be attached to the
stand using these threaded holes
Back plate of feeder
Cross bar on stand
