NEOMERIS CONTROL DES
Operation
Build:20211025-094624-9873335NSt
All information and technical data are subject to
change
Page 63
7.6
Diagnostics
The hardware diagnostics allow the direct manipulation or representation of the outputs and inputs
of the control unit.
The following shown masks contains examplary elements/chan-
nels, which are currently not existing in this present control unit.
Using the
é
/
ê
-keys, you can use a cursor to select one of the digital inputs or outputs whose name
and status are displayed in verbal form. The manipulation (off / on) is done via the
Enter
-key. This
feature gives the technician the opportunity to test the hardware
Example of a digital output:
The analogue outputs can be selected with the
é
/
ê
-keys, as with the digital inputs or outputs. Ma-
nipulation is possible via the
Enter
-key.
Example of an analog output:
All values that are changed in the hardware diagnostics reset the control unit when exiting the menu.
Some menus can not be changed and only show actual values. For example, the CNT menu which
shows the values of the pulse input.
i
NOTE
