NEOMERIS CONTROL DES
Installation
Build:20211025-094624-9873335NSt
All information and technical data are subject to
change
Page 20
b. Working location
c. Date
d. Name of party responsible
3. For connection purposes, exclusively use tested lines with sufficient line cross-sections.
A qualified electrician complying with VDE and EVU installation guidelines and company standards
is required for performing electrical installations.
Notes on terminal assignment can be found in chapter 5.4.4.
To connect the cables, please proceed as follows:
§
Pass the cable through one of the cable glands on the underside of
the housing into the housing interior.
§
Fix the respective cable gland and connect the required wires to
the desired terminals.
§
To do this, insert the conductors into the rectangular cable entry
funnels on the terminal block. Make sure that the wires are fully and
firmly seated in the terminals.
§
To release the connection, insert a screwdriver without lateral force
into the square opening to open the clamping point. Pull out the
conductor with the clamping point open.
