![background image](http://html2.mh-extra.com/html/nelson/n1500i/n1500i_operation-and-service-manual_3933346029.webp)
29
Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany.
Stud welding unit N1500i
As of: Aug 12.2021
Manual part number: BE 1221
the foreseen handles or by means of suitable lifting gear.
The mains cable may not be misused as a handle.
In order to prevent back injury, do not attempt to lift the Nelweld unit alone.
Seek the assistance of at least one other person when moving or lifting
the unit.
3.7 Operating Location
The operating location of the N1500i welding unit is restricted to areas of industrial
and trading nature. Welding can cause radio interference in residential and
commercial areas.
•
Welds that are performed at temperatures below 5°C may have a negative
influence upon the welding result.
•
To protect people not involved, the operating location must be amply cordoned off
and clearly marked with warning and informatory signs.
•
Inflammable and explosive materials must be removed from the danger zone.
Note!
We expressly point out that welding in commercial areas, in the open
or in open halls is as a general principle forbidden.
Danger!
•
Wearers of cardiac pacemakers are as a general principle forbid-
den to stay in the vicinity of stud welding facilities.
•
Electrical external appliances can be disturbed or damaged by the
electromagnetic fields, which occur when welding. Therefore, a
minimum clearance of 10m has to be guaranteed between the wel-
ding apparatus and the external appliances.
•
It is forbidden to operate the equipment in an environment where
there is a risk of fire, explosion or dampness beyond the power
units IP rating.