![background image](http://html2.mh-extra.com/html/nelson/n1500i/n1500i_operation-and-service-manual_3933346091.webp)
Stud welding unit N1500i
As of: June 06.2012
Manual part number: BE 1221
92
Tucker GmbH,
Mail / Post:
Max-Eyth-Str.1, 35394 Gießen, Germany
F
code
Description
Possible Values
Default
Unit
Notes
F46 Plunge Current
Enable
OFF ON
OFF
X
When enabled, the current will change to the selected value while the
stud is plunging.
F47 Plunge Current
50 to max.
200
Amps
When Plunge Current (F46) is enabled, this current will be used during
the plunge state. MAX_CURRENT will depend on the power unit model
(N1500i or N800i) and power input (3 phase or single phase)
F48 Drop Time
Configuration
Manual, Auto, or
Average
Manual
X
In Manual mode, F31 (drop time func- tion) is the only way to configure
the drop time. In Auto mode, F31 automa- tically gets a new value taken
from the first weld done after power-up and af- ter the gun is unplugged.
In Average mode, the average of the last 10 welds’ drop times are used
and displayed in F31.
F49 Pulse Weld Enable OFF ON
OFF
Bool
Enable this to use pulse welding, where the main current pulses to a
high and low current setting at variable time settings per F codes F50-
F52.
F50 Pulse Weld Low
Current
50 to max.
300
Amps
This is the current used as the lower of the two currents during the weld.
(The front panel current setting will be the high current). MAX
CURRENT is the maximum current the unit can deliver given the power
conditions and model
F51 Pulse Weld High
Time
5
1000
ms
This is the time the weld will deliver the front panel current.