![background image](http://html2.mh-extra.com/html/nelson/n1500i/n1500i_operation-and-service-manual_3933346019.webp)
19
Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany.
Stud welding unit N1500i
As of: Aug 12.2021
Manual part number: BE 1221
2.2 Safety notices
Safety should be one of the utmost concerns for each user of a Nelweld unit.
Knowledge of and careful attention to all safety advice granted in this manual is
highly advised by Nelson Stud Welding, Inc.
Observing all safety warnings and advice is a prerequisite for safe and correct
handling and trouble-free operation of the Nelweld series of stud welding power
supplies.
Knowledge of the following safety notices is a prerequisite for safe and correct
handling and trouble-free operation of the Nelweld N1500i.
In addition, the technical regulations for safe and professional working as well as the
generally valid accident prevention regulations have to be observed.
•
Operating instructions must be kept where the Nelweld unit is used. The ability to
quickly consult the manual is highly recommended to all Nelweld users.
•
Safety signs, stickers, etc. must remain attached to the Nelweld unit at all times.
They should remain free from dirt and be kept in legible condition
Personnel training
Warning!
Only a qualified electrician should perform any work inside the unit’s
casing. Any work done should be made in accordance with all local
and national electrical codes. Failure to do so may result in bodily
injury or death.
The operating personnel of the welding unit must:
•
be instructed in handling welding appliances
•
have had training, which permits stud welding
•
know the contents of these operating and service instructions
The maintenance and the electrical specialists must:
•
have had training, which qualifies to carry out repairs
•
be entitled to operate electrical circuits and appliances in accordance with safety
engineering standards