24
Tucker GmbH, Mail / Post: Max-Eyth-Str.1, 35394 Gießen, Germany.
Stud welding unit N1500i
As of: Aug 12.2021
Manual part number: BE 1221
Safety features of the welding unit
The Nelweld welding unit bears the S sign and is suited for welding
under increased electrical danger.
•
The power unit hardware does not allow the output voltage to
exceed 75V.
To protect against direct and indirect contact the welding unit is equip- ped with
the following protective measures:
Protection type IP 23 S:
Protection against penetration by foreign bodies (Ø
≥
12mm). Protection against splash water, inclined up to
60° to the perpendicular.
Protection class I:
Unit with basic insulation and connection of all exposed
conductive parts to the protective conductor.
WARNING
!
During wet weather (e.g. rain), with the N1500i should not be welded
outdoors!
Wet equipment must dry out before use. Operators must always use dry
insulation between themselves and the welding equipment.
2.3 Intended use
During the design and manufacture of the Nelweld N1500i the relevant guidelines and
standards were observed. The welding head was built according to state of the art
technology and is operationally reliable.
Nevertheless, dangers can originate from the Nelweld N1500i welding head if it is
operated by untrained people or is not used as intended.
Observation of the following points falls under intended use:
•
The N1500i is designed for welding studs according to the drawn-arc and the
short-cycle welding methods.
•
The specifications in these operating instructions with regard to material
combinations and the particularities of studs and ceramic ferrules have to be
observed.
•
The Nelweld N1500i is not suited for use in residential and business areas
