![background image](http://html2.mh-extra.com/html/nelson/n1500i/n1500i_operation-and-service-manual_3933346089.webp)
Stud welding unit N1500i
As of: June 06.2012
Manual part number: BE 1221
90
Tucker GmbH,
Mail / Post:
Max-Eyth-Str.1, 35394 Gießen, Germany
F
code
Description
Possible Values
Default
Unit
Notes
F33 Disable Welding on
Weld Error
OFF ON
OFF
X
Turn this on to disable welding when a weld is out of specified weld
energy/ drop range. Flashes ‘WELD ERROR!’ and requires a password
to continue. Password is 123456 by default, but can be changed to any
number up to 9 di- gits. Use lock mode 2 or 3 to set this password.
F34 Drop Time Tolerance 0 to 1000
100
Ms
This defines the tolerance allowed from target weld drop time for deter-
mining good/bad weld.
F35 Weld Energy
Tolerance
1 to 20
10
%
This defines the tolerance allowed from target weld drop time for deter-
mining good/bad weld.
F36
Process Monitor
Error code on failed
weld
OFF ON
OFF
X
When enabled, an error code is given when the weld is out of tolerance.
F37 Pulse Cleaning
Enable
OFF ON
OFF
X
When enabled, the weld current will pulse high current and low current
be- fore the weld.
F38 Pulse Cleaning
Threshold Voltage
0.00 to 50.00
30.00
V
Threshold voltage to stop pulsing and begin the main weld. When
voltage is above this value, it terminates pulsing and starts the weld.
F39 Pulse Cleaning
Maximum Pulses
1 to 10
4
X
Maximum number of pulses before starting main weld.