Code 4420026
Edition no. 1 of 1
st
March 2006
Printed on 13/07/2006
Page 5
WARNING
Risk of injury in the event that the window should fall on outward opening
window frames. A safety system should be mounted onto the window to
guard against falls. This system should be able to withstand at least three
times the total weight of the window .
This device may cause injury by crushing or dragging. During function, when
the actuator closes the frame, it applies a pressure force of 300N against
the
ledge of the casing, and all due measures, care and attention should be
taken to avoid any crushing of fingers .
Check that limit switch selection is less than at least one centimetre with
respect to the mechanical stops, limit switches or any eve ntual obstacles
preventing opening of the wing
In the event of damage or malfunction, switch off the device, disconnect any
electrical connections and request the intervention of a qualified technician
.
MANUFACTURE AND REFERENCE STANDARDS
x
The
KATO RADIO
chain operated actuator has been designed and produced
to open and close bay or outward opening windows, hopper frame windows ,
dormer windows, cupolas and skylights. It has been specifically designed for
providing ventilation and air circulation of are as and can also be used in
combination with the
P2/R
radio operated rain sensor. It is firmly
recommended the actuator not be used for any other purpose without
previously obtaining authorisation from the manufacturers.
x
Electrical connections must conform to regulations in force for the design and
set up of electrical equipment.
x
The actuator has been manufactured in accordance with European Union
directives and has been certified in conformity with
marking.
x
Any eventual service a nd control device for the actuator must be manufactured
in accordance with regulations in force and must conform to respective
European Community regulation.
ACCESSORIES
The KATO RADIO actuator is packed in one single carton. Each package
contains:
x
Actuator with 2 metre
(±5%)
lead.
x
Standard support brackets with distancer
(A)
.
x
Bracket for vertical assembly of the actuator
(B)
.
x
Bracket for transom window
(C)
.
x
Bracket for outward opening fixture
(D)
.
x
Adhesive template for boring.
x
Instruction manual.
