Code 4420026
Edition no. 1 of 1
st
March 2006
Printed on 13/07/2006
Page 11
Assembly with outward opening window.
A.
Pencil in an “X” ove r the centre line of the window
frame (
Fig. 2
).
B.
Select the correct form of brackets (
Fig. 3
).
C.
Attach the adhesive template to the window frame
(fixed part)
and line axis up with the centre line “X”
traced earlier
(Fig. 4)
.
Warning
: for window frames
not on the same plane, cut the part of the adhesive
template coloured in grey and fix this to the
moveable part of the window frame, taking care to
keep it in the same position .
D.
Bore holes in the window frame at the points
indicated on the adhesive template
(Fig. 5)
.
E.
Assemble the two brackets with the distancer
(to
help position correctly. Once it has served its
purpose it can be removed)
. Mount the supports
onto the frame with the appropriate screws
provided. Check that everything is aligned both
horizontall y and vertically .
F.
Mount the bracket for outward opening windows
onto the moveable part of the frame in accordance
with the markings indicated on the adhesive
template .
G.
Complete assembly of the chain terminal with the
rapid release hook inserted onto the pin Ø4x32
(provided)
in median position
(see fig. 6)
.
H.
Mount the actuator onto the brackets by inserting
the two openings at each side onto the
corresponding pins on the brackets .
I.
Rotate the actuator 90°, bring the chain terminal up
to the bracket and ins ert the pin into the opening on
the bracket. Insert the rapid release hook into the
bracket. For the first few times, this may fairly stiff,
but in time the pieces involved will adapt to their
positions .
J.
Check that the exit on the chain is perfectly align ed
with the bracket. If the chain is not aligned with the
bracket, loosen the fixing screws and reposition the
bracket correctly .
K.
Check all electrical connections with the diagram
on the label attached to the lead .
Fig. 2
Fig.3
Fig. 4
Fig. 6
Fig. 5
