NEC VERSA VXi, Service And Reference Manual

Page: 24 / 123

2-2 System Configuration and Setup
Power Sources for the NEC Versa
The NEC Versa can be operated just about anywhere using one of the following power sources:
!
AC adapter connected to an electrical wall outlet (using AC power)
!
battery pack
!
optional auto adapter (for details about its use, refer to the accessory sheet that ships with
the option).
See the following sections for specific information about using the NEC power sources.
Using the AC Adapter
Use the AC adapter and power cable that came with the NEC Versa to run the computer on
alternating current (AC) power, or to recharge the battery pack. Use the AC adapter whenever a
wall outlet is nearby.
When connected, the AC adapter charges the battery whether or not the NEC Versa is powered
on.
Do not attempt to disassemble the AC adapter. The AC adapter has no
user-replaceable or serviceable parts inside. Dangerous voltage in the AC adapter can cause
serious personal injury or death. The AC adapter is intended for use with a computer and must
meet EN609050 standards.
Note
The AC outlet voltage should be in the range of 100-240 volts AC. Verify that the cord
and plug are appropriate for the AC source.
Connecting the AC Adapter
Connect the AC adapter as follows:
1.
Connect the AC adapter cable to the power port on the back of the NEC Versa VXi.
2.
Plug one end of the AC power cable into the AC adapter and the other end into a properly
grounded 120- or 240-volt wall outlet.
Connecting the AC adapter
Do not cover or place objects on the AC adapter. Doing so can cause
the adapter to overheat.