manualshive.com logo in svg

NEC Versa LX, Manual

The NEC Versa LX is a cutting-edge device designed for ultimate performance. To ensure a seamless setup experience, we offer a comprehensive Installation Manual that can be easily downloaded for free from our website. Get the most out of your NEC Versa LX with our user-friendly manual.

Share
Download
background image

Using the Software   3-31

Windows NT Environment

1. 

Insert the Application and Driver CD into the CD-ROM drive.

2. 

Double click the NEC Customize icon.

3. 

Select Launch Application and Driver CD.

4. 

Click Install to launch the CD.

The Application and Driver CD dialog box appears.

Installing the Software

The Application and Driver CD dialog box consists of the following
components.

!

 

Selection Tabs — Located just below the title bar, each tab represents
a software category. The selection tabs include applications, drivers,
utilities, Internet browsers, and the NEC Online Documentation.

!

 

Description — Located in the bottom portion of the dialog box, the
text describes the selected or highlighted software category or
application, driver, etc.

!

 

Install — Clicking the Install button installs the selected software.

!

 

Exit — Clicking the Exit button closes the Application and Driver CD
dialog box.

Once the Application and Driver CD dialog box appears, follow these
steps to install the desired software.

1. 

Click the selection tab of your choice.

2. 

Click the desired application, driver, or utility.

3. 

Click the Install button to install your selection.

Follow the on-screen instructions to install your selection.

4. 

Click Exit to close the Application and Driver CD dialog box.

5. 

Remove the CD from the CD-ROM drive when the installation is
complete.

Summary of Contents for Versa LX
























































































































































































































Reviews:

No comments

Related manuals for Versa LX

Lenze POWERLINK E84DGDV Series Communications Manual preview
POWERLINK E84DGDV Series
Brand: Lenze Pages: 70
BTC BCO4016IM User Manual preview
BCO4016IM
Brand: BTC Pages: 22
Omron JUNMA SJDE-**APA-OY User Manual preview
JUNMA SJDE-**APA-OY
Brand: Omron Pages: 63
Nitto Seiko KX Series Instruction Manual preview
KX Series
Brand: Nitto Seiko Pages: 30
Injung Tech INJ-4500 User Quick Manual preview
INJ-4500
Brand: Injung Tech Pages: 16
ab 1391-DES Series User Manual preview
1391-DES Series
Brand: ab Pages: 150
Borg Warner DuroSpeed Series Installation & Service Manual preview
DuroSpeed Series
Brand: Borg Warner Pages: 15
Apricorn EZ Writer User Manual preview
EZ Writer
Brand: Apricorn Pages: 20
ZIEHL-ABEGG ZAdyn4CA 018 HY Quick Start Manual preview
ZAdyn4CA 018 HY
Brand: ZIEHL-ABEGG Pages: 28
Vacon apfiff09 marine Applications Manual preview
apfiff09 marine
Brand: Vacon Pages: 310
LaCie DVD Dual Drive User Manual preview
DVD Dual Drive
Brand: LaCie Pages: 43
Macurco RD-24 Installation & Operation Manual preview
RD-24
Brand: Macurco Pages: 23
ABB ACS580MV Hardware Manual preview
ACS580MV
Brand: ABB Pages: 146
OEM PDD-300 User Manual preview
PDD-300
Brand: OEM Pages: 15
National Instruments NI SMD-7613 Getting Started preview
NI SMD-7613
Brand: National Instruments Pages: 13
Danfoss VLT FCD 311 Design Manual preview
VLT FCD 311
Brand: Danfoss Pages: 144
YASKAWA SI-EP3 Installation Manual preview
SI-EP3
Brand: YASKAWA Pages: 78
Bardac E3 Series Quick Start Manual preview
E3 Series
Brand: Bardac Pages: 24

Brands by name

Popular brands

Load more brands