NEC Versa LX Manual Download Page 75

Page: 75 / 215

3-30 Using the Software

The software* applications available on the Application and Driver CD
vary according to your operating system environment and may include:

PowerQuest

PartitionMagic

Intel LANDesk

Client Manager

SystemSoft

PowerProfiler (Windows NT only)

SystemSoft

CardWizard (Windows NT only)

Intellisync™ for Notebooks

McAfee VirusScan™

Microsoft

Internet Explorer

Netscape Navigator™

Adobe

Acrobat

Reader

* The software listed here is current at the time of printing and subject to change without notice.

Using the Application and Driver CD

Use the Application and Driver CD to install applications, drivers,
utilities, Internet browsers, and the online NEC Help Center.

Launching the Application and Driver CD

Follow these procedures to launch the Application and Driver CD using
NEC Customize.

Windows 98 and Windows 95 Environments

Insert the Application and Driver CD into the CD-ROM drive.

Double click the NEC Customize icon, if necessary.

Highlight Launch Application and Driver CD.

Click launch.

The Application and Driver CD dialog box appears.

Summary of Contents for Versa LX
























































































































































































































Search results

Summary of Contents for Versa LX

Reviews:

Related manuals for Versa LX

Brands by name

Popular brands

NEC Versa LX, Manual

Search results

Summary of Contents for Versa LX

Reviews:

Related manuals for Versa LX

Brands by name

Popular brands