4-26 Using Your NEC Versa
INCREASING SYSTEM STORAGE AND MEMORY
As your needs grow and change, you may need to add an optional hard disk
drive with a greater capacity, or additional memory. Read the following
sections to learn how to install an optional hard disk drive, or a memory
module.
Hard Disk
You can increase the system’s storage capacity by replacing the standard
hard disk drive or adding a second hard disk drive in the VersaBay II.
(Adding a second hard disk drive is described in the section “Customizing
Your System with the VersaBay II.”)
NOTE
NEC Versa hard disk drives can be used in other NEC note-
book computers such as the NEC Versa 2000 and 4000 Series sys-
tems. However, hard disk drives from earlier models can only be
used in the VersaBay II. Check the top of the hard drive for a blue
dot. If the drive case has the blue dot on it, you can use the drive in
either the drive bay or the VersaBay II.
Replace the hard disk drive as follows.
1.
Check that the NEC Versa power is off.
2.
Turn the NEC Versa upside down.
3.
Remove the drive cover as follows:
Remove the Phillips-head screw that secures the drive cover.
Summary of Contents for VERSA 6220 - SERVICE
Page 197: ...Index 6...
