Using Your NEC Versa 4-57
Reassembling the system
Close the LCD panel and turn the system upside down.
Replace the speaker cap screws.
9.
Your system is now ready for the BIOS update. Continue to the next
section to update the BIOS.
Performing the BIOS Update
Use the following procedure to perform the actual BIOS update.
1.
Make sure that the computer is operating under AC power, and that the
power is off. Insert the BIOS Update diskette into diskette drive A.
2.
Power on the computer with the diskette in drive A. The computer boots
and automatically loads the utility. A message similar to the following
appears:
The NEC BIOS Update Utility should not be used
to modify the BIOS in a Versa system which is
docked. If your Versa is docked, please exit the
BIOS Update Utility, power down, and undock your
Versa before running the utility. Plug in your AC
cable before restarting the flash utility.
3.
Press
Enter
to continue.
The utility checks the currently installed BIOS version and the diskette’s
BIOS version. The Main Menu appears.
Summary of Contents for VERSA 6220 - SERVICE
Page 197: ...Index 6...
