Using Your NEC Versa 4-35
1.
Make sure the system is powered off and that no peripheral devices are
attached.
2.
Locate and remove the two Phillips-head screws on the bottom of the
NEC Versa that secure the speaker caps.
Put the screws in a safe place for reassembly.
Locating the speaker cap screws
3.
Turn the NEC Versa over and open the LCD panel.
4.
Locate the two speaker caps, slide each one toward the outside edge of
the system, and remove.
Summary of Contents for VERSA 6220 - SERVICE
Page 197: ...Index 6...
