Using Your NEC Versa 4-17
3.
Select the PC card to remove, and select “Stop.”
Windows 95 alerts you if any applications are still using the card. If all
applications using the card are closed, services for that card are shut
down. You receive a message saying that it is safe to remove the card.
4.
Press the button on the side of the PC card in the slot.
Windows for Workgroups
Remove PC cards from Windows for Workgroups (Windows 3.11) systems
as follows.
1.
To remove the card, press the button on the side of the slot. A double
tone sounds.
2.
Pull the card firmly out of the slot.
NOTE
PC cards draw power even when not in use. To save energy,
press the button to disconnect the card when it is not in use. You
can leave the card in the slot while it is disconnected for easy
storage.
PC Card Drivers and Enablers
Your NEC notebook computer is configured to support a variety of PC
cards. In Windows for Workgroups, the AUTOEXEC.BAT and
CONFIG.SYS files contain and load the PC card drivers. You can modify
these files using a text editor to remove drivers in order to free needed
memory.
Some PC cards come with software called Enablers to be used instead of
Card Services. Before installing Enablers, try your PC card with the pre-
loaded drivers. The NEC Versa Card and Socket Services works with many
PC cards.
PC Card Drivers and Utilities
The following are the CardSoft drivers (for Windows for Workgroups sys-
tems only) and utilities used on your NEC Versa. Some of these drivers may
be disabled in the system files to conserve memory.
Summary of Contents for VERSA 6220 - SERVICE
Page 197: ...Index 6...
