Using HOSTKEY
Chapter 6: Options
VANGARD Mail/i-Series Quick Setup Guide
◆
69
Running or Installing HOSTKEY
You can now choose whether to run the HOSTKEY program on your laptop computer from the
HOSTKEY diskette or to install HOSTKEY permanently on your laptop hard disk.
Note: If you run the HOSTKEY program on your laptop, you will need to repeat this procedure
every time you use HOSTKEY.
To run the HOSTKEY program on your laptop computer:
1.
Turn on the laptop computer, and insert the HOSTKEY disketteinto the laptop floppy drive.
2.
At
DOS:\->
: Type
A:\HOSTKEY
and press
Enter
.
3.
Check that the BUSY light on the Voice Mail is not lit. Remove the plug from the 18VDC
jack, and then replug it into this jack to start the Voice Mail.
You will see the Main Menu on your laptop computer display.
Or to install HOSTKEY permanently on your laptop hard disk:
1.
At
C:\->:
Type
MD
to make a directory, and name the directory
HOSTKEY
.
2.
At
C:\->:
Type
COPY A: C:\HOSTKEY
to copy the HOSTKEY file (HOSTKEY.exe) onto the direc-
tory.
3.
At
C:\HOSTKEY->:
Type
CDHOSTKEY
to change to the directory you just created.
4.
At
C:\HOSTKEY->:
Type
HOSTKEY
to run the program from that directory.
Rebooting VANGARD Mail
To reboot the Voice Mail, if necessary, using HOSTKEY:
●
Press
CTRL-ALT-F10
.
Exiting from HOSTKEY
To exit from HOSTKEY:
●
Press
CTRL-X
.
Returning the Voice Mail COM2 to the default setting:
To return the Voice Mail’s COM2 to the default setting:
1.
Log into the System Admin Mailbox.
2.
Enter the security code, if required.
3.
Enter
SA
to access the System Administrator Options.
4.
Enter
C2
for Modem/COM2.
The system responds with the Ready prompt. Ready confirms that the selected COM has
been reset to the default setting.
(C2 is a service option. It is not be listed in the SA help menu.)
5.
Hang up.
