Basic Voice Mail Programming
Selecting the Active Language
Chapter 4: Voice Mail Programming
VANGARD Mail/i-Series Quick Setup Guide
◆
59
Be sure to do so within 5 seconds; otherwise, the Voice Mail will reboot.
You will see:
The prompt files found in C:\ADPCM\OKI:
-------------------------------------
1- ENGISH.NDX
2- SPANISH.NDX
3- FRENCH.NDX
4- ENGL2.NDX
Primary language (-Enter the number) :
(1) ENGLISH.NDX >:
6.
To assign your primary language (referred to as Language 1 in other areas of Voice Mail Pro-
gramming)
■
Enter the number (1 through 4 as shown above) that corresponds to the language you wish
to assign as your primary language and press
<Enter>.
OR
■
Press
<Enter>
to keep the default of English Mnemonic
(
1 - ENGLISH.NDX
) as the primary language.
You will see your selection confirmed on the screen. For example:
Primary language prompt file: ENGLISH.NDX
This confirmation prompt is followed by:
Secondary language (-Enter the number)
(4) ENGL2.NDX >:
7.
To assign your secondary language (referred to as Language 2 in other areas of Voice Mail
Programming)
■
Enter the number (1 through 4 as shown above) that corresponds to the language you wish
to assign as your secondary language and press
<Enter>
.
OR
■
Press
<Enter>
to keep the default of English Numeric
(
4 - ENGL2.NDX
) as the secondary language.
You will see your selection confirmed on the screen. For example:
Secondary language prompt file: ENGL2.NDX
You will see: Initiating voice mail startup...
and you will return to the Main Menu.
Other Programming
When you access
View Current Settings
, your primary language is shown as
(1)
. For example,
if you select English Mnemonic as your primary language,
View Current Settings
will show:
Default Bilingual Mode...........English (1)
In
System Options,
your primary language is shown as
(1)
. For example, if you selected English
Mnemonic as your primary language,
System Options
will show:
Default bilingual mode (L-Language 2) - English (1)
If you select English Numeric as your secondary language and then press L to switch to
Language 2, you will see:
Default bilingual mode (L-Language 1) - English-2 (2)
