NEC UNIVERGE UM8500, Integration Manual

Page: 60 / 352

UNIVERGE UM8500 I
NTEGRATION
G
UIDE
50
Changing the number of installed ports
After the dual-switch integration is set up, follow these steps to add or remove
voice boards or uninstall voice board software, follow these steps:
1
Remove the Cisco TAPI service provider.
See “ To remove the TAPI service provider ” below.
2
As appropriate, remove or add voice boards, or uninstall and
reinstall the voice board software.
See the System Management Help for information about removing Dialogic or
NMS voice board software.
3
Reinstall the TAPI service provider after setting up the voice
boards or reinstalling the voice board software.
See “ To reinstall the TAPI service provider ” on page 50.
4
Adjust the port assignments on the
System
>
Ports
page.
If the traditional phone system is completely removed, the port assignments
for CallManager on the
System
>
Ports
page must be adjusted, after the
voice boards and voice board software used in the integration with the
traditional phone system are removed.
To remove the TAPI service provider
1
On the messaging system server, log on to Windows as an administrator.
2
On the Windows taskbar, click
Start
>
Control Panel
.
3
Double-click
Phone and Modem Options
. The Phone and Modem
Options dialog box appears.
4
Click the
Advanced
tab.
5
Depending on which TAPI service provider is installed, click either
Cisco
Unity-CM TSP
or
Cisco IP PBX Service Provider
, then click
Remove
.
6
Click
Yes
to remove the selected telephony driver.
7
Click
Close
to close the Phone and Modem Options dialog box.
To reinstall the TAPI service provider
1
On the messaging system server, log on to Windows as an administrator.
Subscribers >
Subscribers > Profile Switch Select the phone system that the subscriber uses as a work
phone. If this setting is incorrect, UM8500 will not be able to:
●
Transfer calls to or from the subscriber.
●
Dial the subscriber’s extension for Media Master recording by
phone.
On the System > Ports page, the selected phone system must
have an appropriate number of ports set to answer calls and to
dial out for MWIs and Media Master recording by phone.
Call Handlers >
Profile Switch Select the phone system that the call handler uses. If this setting
is incorrect, UM8500 can not transfer calls to or from the call
handler.
Subscribers >
Subscriber Template
> MWI Switch Select the phone system the subscriber’s MWI extension belongs
to. If this setting is incorrect, UM8500 will not be able to turn
MWIs on or off. On the
System > Ports page, the selected phone
system must have at least one port set to dial out for MWIs.
Subscribers >
Subscribers > MWI Switch Select the phone system the subscriber’s MWI extension belongs
to. If this setting is incorrect, UM8500 will not be able to turn
MWIs on or off. On the
System > Ports page, the selected phone
system must have at least one port set to dial out for MWIs.
Dual-switch integration settings
Page Field Description