NEC UNIVERGE UM8500, Integration Manual

Page: 179 / 352

NEC NEAX 2400
WITH
OAI
169
4
If using the OAI UCD-LAN/Serial MCI integration, use the following table to
set up the UCD hunt group. In this instance, the UCD group is extensions
220-223, with 220 as the pilot.
To set OAI monitored function keys for Live Record
If the Live Record feature will be used in the phone system, verify that the system
has the following default settings or that the configuration files are updated.
1
Type the
AOKC
command in the Windows MAT application. The AOKC (OAI
Key Code Data) dialog box appears.
2
Assign the OAI key code data:
The OAI key codes 1 through 14 correspond to AKYD key codes FKY 34
through 47 respectively. By default, the OAI Integration server uses the TMF
codes 192-195 for the Live Record commands Record, Pause/Resume, Re-
Record and End, respectively.
■
Set
F-KIND
to
2
.
■
Set
C-TONE
to
1.
3
Save the AOKC key code information.
4
Type
AKYD
command in the Windows MAT application. The AKYD (Dterm
Key Data) dialog box appears.
Assign the function key data for the desired Dterm station;
■
Assign FKY 34 through 47 to any positions of FKY 1 through 16.
■
The OAI key codes for the NEAX 2400 are FKY 34-47 and by default are
assigned to the third row from the top of function keys on the Dterm
station. This row contains the function keys with ID 9 to 12.
■
Confirm that the my-line is assigned in order to successfully complete
the AKYD command.
5
Click
Exit
to save the AKYD information.
NOTE
Do not adjust UCD hunt group settings if using an OAI pure
integration.
Cmd Tenant Value Description
ASHU 1 220 Pilot and Port number
221 Port number
222 Port number
223 Port number
WARNING
If the default settings below are not used, the corresponding
settings in the OAI Integration software must be set up
accordingly by editing the XML configuration file.