NEC UNIVERGE UM8500, Integration Manual

Page: 101 / 352

M
ITEL
3300 ICP T1
WITH
D
IGITAL
E&M
91
3
Program the Trunk Service Assignment form to apply the relevant Class of
Service (COS) and Class of Restriction (COR) to the E&M voice mail ports.
Enter
0
in the
Absorb
field.
4
Program the E&M trunks in the Trunk Assignment and Trunk Group
Assignment forms using circular hunting.
5
In the Call Progress Tone Detection Assignment form, program the
parameters as shown in the following table:
6
In the Digit Modification Assignment form, program the parameters as
shown in the following table:
7
In the Route Assignment form, program the route assignments then reference
the relevant trunk group and digit modification numbers. Digits before
outpulsing can be set to eliminate overlap outpulsing. However, this is not
required.
8
In the ARS Leading Digits Assignment form, program the parameters as
shown in the following table:
NOTE
Toll fraud should be considered when assigning a COR to the voice
mail ports. External dialing may be required for pager notification
or message forwarding.
Call Progress Tone Detection Plan Assignment settings
Setting Value
Maximum Wait for Dial Tone (0-99) 5
Tone Plan Number 01
Action on Timeout outpulse default
Digital Modification Assignment settings
Number of Dig-
its to Absorb Digits to be Inserted
1 <T01>
*
1 <T01>
*
<E>
This is optional for message retrieval and
analog networking.
NOTE
It may be necessary to insert a tone, for example, * or #, after
the tone plan if the voice mail ports are configured to provide
automated attendant functionality. The tone required will put the
processor into telephone answering mode.
ARS Leading Digits Assignment settings
Setting Value
Leading digits 8
Second Dial tone No
COR Group Number