![background image](http://html.mh-extra.com/html/nec/univerge-um8000/univerge-um8000_installation-manual_248355048.webp)
Issue No. 1.0
UM8000
6 - 4
Hardware
4.
Install the Compact Flash drive into slot CN7. Ensure the drive is
fully seated in the slot. Refer to
Figure 6-4 Install the Compact
.
S
ECTION
3
L
OAD
P
USH
-
BUTTON
S
WITCH
The Load push-button switch on the CD-VM00 Blade provides the following functions:
3.1
Initialize Factory Defaults
To initialize factory defaults, perform the following steps:
1.
Turn off power for the Chassis where the CD-VM00 is installed.
2.
Press and hold the Load button on CD-VM00.
3.
While holding the Load button, turn on Chassis power.
4.
Continue to hold the Load button for 20 seconds.
5.
Release the Load button.
3.2
Reset CD-VM00 (APSU)
To reset the CD-VM00, perform the following operation:
1.
While the voice mail is running, hold the Load button for more than three
seconds.
Figure 6-4 Install the Compact Flash Drive
NOTE
Do not press the reset button while the voice messaging system is running. This can
corrupt the database.
Summary of Contents for Univerge UM8000
