![background image](http://html.mh-extra.com/html/nec/univerge-um8000/univerge-um8000_installation-manual_248355047.webp)
UM8000
Issue No. 1.0
Installation Manual
6 - 3
Perform the following procedure to install the CD-VM00.
1.
Wear a grounding strap while handling the CD-VM00 and DSP. Lay the compo-
nents on a flat work surface.
2.
Mount the CR-2032 battery with the “+” side up in the “BATT” slot on the
CD-VM00. Refer to
Figure 6-2 Install the CR-2032 Battery on page 6-3
3.
To install the SO-DIMM memory on the CD-VM00 blade, insert the end with the
brass connectors into the CN14 1 slot. Then, push the other end down until the
locks on both sides lock into place. Refer to
Figure 6-3 Install the SO-DIMM
.
Figure 6-2 Install the CR-2032 Battery
Figure 6-3 Install the SO-DIMM Memory
Summary of Contents for Univerge UM8000
