manualshive.com logo in svg

NEC Univerge SV8100 DT310, User Manual

Share
Download
NEC Univerge SV8100 DT310 User Manual Download Page 27

 19 

1.

Note:

DT310/DT710 (2-Button without LCD and
DT310 [6-Button with LCD]) does not have
the Cursor Key.

(14)Enter

DT330/DT730 Series has Shortcut Menu for 
frequently-used features. The user can access to 
Shortcut Menu by pressing 

Enter

 Key.

Shortcut Menu includes the following features. (Ex. 

of DT730)

(15)Redial/CID Scroll

     (Last Number Call, Speed Calling-Station/Group)

Press key once to activate redial feature. Press 
redial and scroll through numbers that have been 
dialed. 
When the desired number is displayed, press the # 
key to activate dialing.
Press key twice to activate the CID scroll feature.  
Press key twice and scroll through numbers that 
have been received.
When the desired number is displayed go off hook 
to activate dialing.

(16)Speaker

Controls the built-in speaker which can be used for
Hands Free dialing/monitoring.
LED on key lights when key is active.
DT330/DT730 supports half/full duplex handsfree.

Menu of
DT330

Menu of DT730

Feature

Description

1. Missed Call Access to history of Missed Call.

2. Voice Mail Access to history of incoming Voice Mail.

3. IM

Not Supported.

4. Presence

Not Supported.

5. Backlight

Access to screen for LCD backlight settings.

6.Bluetooth

Not Supported.

Summary of Contents for Univerge SV8100 DT310















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands