NEC Univerge SV 9500 User Manual Download Page 93

Page: 93 / 263

STEP 11:Enter the password by using digit keys, then

press

or the

soft key.

STEP 12:The display goes back to the

FTP Settings

screen. Select

Folder

Select an item by either of the following operations.
• Highlight an item by using

or the

UP/DOWN

soft

key, and then press

or the

soft key.

• Press

key.

STEP 13:Enter the directory where the backup file is

stored and then press

or the

soft key.

STEP 14:The display goes back to the

FTP Settings

screen. Press

or the

Back

soft key to dis-

play the

Backup/Restore

screen.

Note:

For details on character entry method, see

HOW

TO INPUT CHARACTERS

in chapter 4 Basic

Operation.

Back

[Password]

Input a password.

[FTP Settings]

Back

User ID
Password



Folder

Note:

For details on character entry method, see

HOW

TO INPUT CHARACTERS

in chapter 4 Basic

Operation.

Back

[Folder]

Input a folder name.

[FTP Settings]

Back



Folder

User ID

Password

Summary of Contents for Univerge SV 9500








































































































































































































































































Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands

NEC Univerge SV 9500, User Manual

Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands