NEC Univerge SV 9500 User Manual Download Page 38

Page: 38 / 263

INSTALLING DIRECTORY CARD

An optional directory card (also known as an

abbreviated dialing table) can be attached to the

telephone sets. The directory card can be used to

record often dialed numbers or other important

information.

STEP 1: Remove the protective sheet from the cover.

STEP 2: Attach the cover to the directory card and

then attach it to the directory card holder.

INSTALLING/REMOVING LINE KEY
CARD

• TO REMOVE KEY SET UNIT (LINE KEY

PANEL AND LINE KEY CARD)

STEP 1: Insert the tip of a tool (such as a small screw-

driver) into the right side of the line key panel.

STEP 2: Pull the line key panel out of the telephone.

STEP 3: Remove the line key card.

Note:

To remove the directory card, pinch both sides of
the directory card holder inward until the tabs
release and pull the holder out of the grooves.

DT830 DT430/410

Cover

Directory Card

Holder

Grooves

DT830 DT430/410

Line Key Panel

Line Key Card

Summary of Contents for Univerge SV 9500








































































































































































































































































Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands

NEC Univerge SV 9500, User Manual

Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands