NEC Univerge SV 9500 User Manual Download Page 89

Page: 89 / 263

STEP 17:The display goes back to the

Backup/Re-

store

screen. Select

Data Backup

Select an item by either of the following operations.
• Highlight an item by using

or the

UP/DOWN

soft

key, and then press

or the

soft key.

• Press

key.

STEP 18:The default file name is displayed as follows:

Press the

Enc

soft key

to download the encrypted

backup file.
The encrypted backup file name is displayed as
“PersonalData.tgz.ef”.

STEP 19:Press

or the

Exec

soft key to start the

data backup. While making a backup copy,
the LCD displays “Uploading...” first and then
“Saving...”.

Note:

Do not change the extension of the backup file.
The setting data of the telephone can only be
backed up as a.tgz file.

Note:

When changing the default file name, press the

soft key once to delete the default file name

and then enter a new file name by using the digits
keys.

[Backup/Restore]

3
4

Back



Data Restore



5 FTP Settings

Protocol

Server Address

Data Backup

Exec

Cancel

[Data Backup]

Input a folder name.

PersonalData.tgz

Enc

Note:

For details on character entry method, see

HOW

TO INPUT CHARACTERS

in chapter 4 Basic

Operation.

Note:

A maximum of 20 characters (“0-9”, “A-Z”, “a-z”,
“*”, “#”, “.”, “-” or “_”) can be entered as a file
name.

Note:

To delete an entered character, press the

soft

key.

Note:

If you make the unencrypted file, press the

NoEnc

soft key.

Note:

Be sure not to turn OFF the DT830 Series while
“Saving...” is displayed on the LCD.

Exec

Cancel

[Data Backup]

Input a folder name.

PersonalData.tgz.ef

NoEnc

Summary of Contents for Univerge SV 9500








































































































































































































































































Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands

NEC Univerge SV 9500, User Manual

Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands