NEC Univerge SV 9500 User Manual Download Page 142

Page: 142 / 263

133

STEP 5: Dial the desired number.

STEP 6: If an “Authorization Code” is required, the

caller hears a special dial tone.

STEP 7: Enter “Authorization Code”, or call will be de-

nied.

To Enter With Account Code (see above)

Service set tone is optional depending upon system
programming.

VOICE CALL

STEP 1: Lift the handset.

STEP 2: Dial the desired station number.

STEP 3: Press the

Voice

key.

STEP 4: Speak to called party.

Using Soft Key

STEP 1: Lift the handset.

STEP 2: Dial the desired station number; the

VOICE

soft key appears while the station is ringing.

STEP 3: Press the

VOICE

soft key and speak to called

party.

Note:

This option is available only if system is pro-
grammed with Least Cost Routing.

Note:

If a 4, 8, 16 or 32-button display terminal is used,
the display indicates all of the digits dialed.

DT830 DT430/410

VOICE

2000

1:25 PM MON 11 MAY 2015

Note:

A Voice Call may be programmed on a

One-

Touch Speed Calling

key by pressing the

One-

Touch Speed Calling

key, dialing the extension,

and pressing the

key. (The

VOICE

key

will display on LCD if it is programmed and saved
on the terminal.)

Note:

If called party is on their line when a Voice Call is
attempted, calling station's display indicates as
follows:

Note:

A voice call is restricted if called party's station is
not a DT Series. Display indicates as follows:

2000

Mic

>>>

Voice

1:25 PM MON 11 MAY 2015

Transfer

VOICE BUSY

1:25 PM MON 11 MAY 2015

VOICE REST

1:25 PM MON 11 MAY 2015

Summary of Contents for Univerge SV 9500








































































































































































































































































Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands

NEC Univerge SV 9500, User Manual

Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands