NEC Univerge SV 9500 User Manual Download Page 29

Page: 29 / 263

Release/RLS (Release Key)

Allows you to release the current call when using the

headset, without waiting for the party to hang up.

Signal/SIG (Manual Signaling)

Permits station users to send a one-second ring to a

predetermined station. If the signaled station is ringing

from another call, the manual intercom signal will

interrupt that ringing.

CallKeep/CKEEP (Eight-Party Conference Retrain)

Allows all outside parties to stay on a conference when

all internal parties hang up.

Serial/SCALL (Serial Call)

Allows you to set Serial Call for the caller before

extending the call, allowing the caller to receive an

announcement at the end of the call guiding the caller

to dial the next number and subsequent numbers.

IZPaging/IZP (Internal Zone Paging)

Allows a user to make a voice call through the speakers

of the designated group.

IDChange/IDCHG (Call ID Change Display)

Allows you to toggle between standard display and an

alternate display.

G-PickUp/GPICK (Call Pickup - Group
Enhancement)

Allows you to answer any ringing station within your

expanded call pickup group.

CH Conf./CHCNF (Call Hold - Conference)

Allows a station user to establish a conference

connection by adding a third party, who is held on

another line, to the existing two-party connection.

Visitor/VISIT (Survivable Remote MGC)

Allows a station to indicate a status: when a user is in

remote office, VISIT will be blinking. After recovering

the main office, VISIT will return to light.

RingMute/RMUTE (Ringer Mute)

Allows a station user to mute or recover station ringing.

Reverse/RVERS:

Allows you to reverse the black and white in its display:
background, characters, and icons.

SPD Set/SPDSET (One-Touch Speed Calling)

Allows you to add, edit, or delete the One-Touch Speed

Calling key.

>>> (Display Function Next Page)

Allows you to scroll to the next screen.

<<< (Display Function Previous Page)

Allows you to scroll to the previous screen.

Note:

Not available for DT410 Series.

Mic NoDist Reverse >>>

1:25 PM MON 11 MAY 2015

Mic NoDist Reverse >>>

1:25 PM MON 11 MAY 2015

Summary of Contents for Univerge SV 9500








































































































































































































































































Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands

NEC Univerge SV 9500, User Manual

Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands