NEC Univerge SV 9500 User Manual Download Page 151

Page: 151 / 263

142

CALL PICK-UP (DIRECT)

To Program Pick- up Direct Key (One-
Touch Speed Calling Key)

STEP 1: Press

key.

STEP 2: Press the

One-Touch Speed Calling

key.

STEP 3: Dial the “Direct Call Pick-up” access code.

STEP 4: Press

key again.

When A Station Within System Rings

STEP 1: Lift the handset, receive a dial tone.

STEP 2: Press the

PICK-DIRECT

key and dial the sta-

tion number to be picked up.

– OR –

STEP 2: Dial the “Direct Call Pick-up” access code and

the station number to be picked up.

STEP 3: Connection to calling party is established.

STEP 4: If busy, the original call must be placed on

hold before new call can be picked up.

OUTGOING TRUNK QUEUING

If Trunk Is Busy

STEP 1: Receive Trunk Busy indication. Press the

CALL BACK

key, Call is placed in queue for

next available trunk.

STEP 2: When trunk is available, the setting station is

alerted by ringing and flashing red LED.

STEP 3: Press

key or lift the handset. A dial

tone is heard or number is automatically di-
aled if Least Cost Routing is provided.

OFF-HOOK TRUNK QUEUING

STEP 1: Press

key, receive a dial tone.

STEP 2: Dial desired telephone number. Encounter a

trunk busy condition.

STEP 3: A station user receives a service set tone and

leaves speaker on.

STEP 4: The desired number is automatically dialed

when a trunk becomes available.

DT830 DT430/410

Feature

station

Calling

party

Called

PICK UP

2000 DDD

1:25 PM MON 11 MAY 2015

DT830 DT430/410

Speaker

OG-Q SET

1:25 PM MON 11 MAY 2015

DT830 DT430/410

Speaker

Summary of Contents for Univerge SV 9500








































































































































































































































































Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands

NEC Univerge SV 9500, User Manual

Search results

Summary of Contents for Univerge SV 9500

Reviews:

Related manuals for Univerge SV 9500

Brands by name

Popular brands