![background image](http://html1.mh-extra.com/html/nec/univerge-sl2100/univerge-sl2100_networking-manual_3921244140.webp)
6.
Program 15-05-27
Each IP phone requires a unique personal ID index. Valid settings are 1 ~ 512.
Figure 9-32 Automatic Registration Basic Setup
Figure 9-33 Automatic Registration Personal ID Index
7.
Program 84-22-01
Assign the user ID and password to be associated with the Personal ID Index assigned in Step 6.
Figure 9-34 Automatic Registration User Name and Password Assignment
8.
The SIP MLT Station requires assignments to be made in the phone itself. Enter the Program
Mode in the station using the following steps.
The station does not require an Ethernet connection to enter the program mode. Only power is
required. Power can be provided by an AC adapter plugged into the phone or by POE provided by a
data switch. If the data switch is providing POE it MUST be using the
802.3AF
standard.
For Basic bench testing, only the following assignments are required:
• At this point, you are prompted with a User Name and Password. These are the defaults:
User Name:
ADMIN
Password:
6633222
The user name should already be entered in the terminal.
• Press
Set
soft key to step down to the password field.
• After you enter the password, press
OK
soft key.
SL2100
ISSUE 1.0
9-42
IP Multiline Station (SIP)
Summary of Contents for UNIVERGE SL2100
